Philips RQ 1175 Manual page 24

3 Press the on/off button on the Jet Clean
System to start the cleaning program.
, The shaver display stops showing the charging
indication.
,
,
cleaning program, which takes a few minutes.
,
the shaver automatically switches on and off
several times and moves up and down.
, During the second phase of the cleaning
program, the shaver is placed in the drying
This phase takes approx. 2 hours. The shaver
stays in this position until the end of the
program.
, After the cleaning program, the charging
indication appears on the shaver display (see
chapter 'The display').
Note: If you press the on/off button of the Jet
Clean System during the cleaning program, the
program aborts. In this case, the cleaning or drying
highest position.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts. The
holder remains in its current position. When you put
the adapter back into the wall socket, the holder moves
to the highest position.
ENGLISH
23