Sony TRINITRON KV-27FV300 Service Manual page 102

Operating Instructions


If you lose your remote control, see page 54.
6
Button Description
qd POWER Press to turn on and off the TV and other audio/video
buttons equipment you have programmed into the remote control.
For instructions, see "Programming the Remote Control"
on page 49.
qf FUNCTION Press to select the equipment (TV, VCR/DVD, SAT/
buttons CABLE) that you want to operate with the remote control.
The indicator (LED) lights up momentarily when pushed
to show which device the remote control is operating.
qg TV/VIDEO Press to cycle through available video inputs.
qh Press to change between the VHF/UHF input to the AUX
ANT
(antenna) input, press again to switch back.
qj and Press to change channels directly. The channel changes
0 9
after 2 seconds.
ENTER
qk See "Using Picture in Picture (PIP) with Remote Y182" on
page 26 for details.
ql See "Using Picture in Picture (PIP) with Remote Y182" on
page 26 for details.
w; Press to display the program guide of your satellite
GUIDE
antenna.
wa CH (channel) Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
ws RESET Press to return to the factory settings while in an on-screen
menu.
wd Use to switch control for connected video equipment. You
AV 1 2 3 DVD
can program one video source for each switch position.
For details, see "Programming the Remote Control" on
page 49.