Using The Timer Menu - Sony TRINITRON KV-27FV300 Service Manual

Using the Timer
To access the Timer menu, refer to the following steps:
To Display To Highlight
f
Press joystick to highlight an option then press
Current Time Set your TV to the current day and time.
1
2


You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Use the timers to program your TV to turn on and off by day, time,
Timer 2 duration and channel. The timers duration is maximum of 6 hours. When
Scheduled the channel is fixed, it is not necessary to set the channel. Press
viewing program Timer 1 or Timer 2.
1
2
3


Select Off to turn off the Timer (your previous settings will be saved).


When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
Menu
To Select
Use the joystick to scroll up or down to enter the correct day and
time, then press .
Press to return Timer menu or press
Use the joystick to highlight to select Timer 1 or Timer 2, then press
Use the joystick to enter the desired day, start time, duration, and
channel, then press
Timer has been set, and the Timer light on the front panel of the TV
should be turned on.
Press to exit the menu.
Video
Timer 1 : Set
Timer 2 : Set
Current Time
Program the time
.
Move:
. The timer status should be On when the
Using the Menus
Audio Channel Parent Timer Setup
Program
:
End:
Select:
to exit the menu.
to
Basic
AM
.
45