Filling Water - Honeywell CL30XC Owner's Manual

Portable evaporative air cooler
Hide thumbs Also See for CL30XC:
Table of Contents

Advertisement

CAUTION
Unplug from power when refilling.

FILLING WATER

Unplug the air cooler from power supply.
Check water level indicator located on the front of the unit to
determine the level of water inside the water tank. The water
tank of this cooler holds up to 30 Litres of water. Be sure water
in the tank is always above the minimum water level mark.
To refill the water tank, open the Water Fill Door located below
the left side panel (refer to page 7) and fill water to the Max
Level, as indicated on the Water Level Indicator. Do not fill
water above the Max water level mark.
For better cooling performance, we suggest putting ice cubes
inside the ice compartment located on the top side of your
cooler.
After refilling the water tank and loading ice, close the water fill
door, connect the power supply and turn on.
Note :
Running the unit with inadequate water may cause pump
failure.
USE & OPERATION
Water Fill Door
Top Ice Loading Compartment
13

Advertisement

Table of Contents
loading

Table of Contents