Remote Control; Safety Features - SPT SH-1508 Instruction Manual

3) When the air temperature drops 1 degree below the SET TEMP, the unit will come back on.
4) Note: it is normal for the heater to cycle ON and OFF as it maintains the SET TEMP.
7．OSC: Pressing the 'OSC' button will allow the heater to oscillate. To stop the oscillation,
press the 'OSC' button once more.
degree Manual oscillation
8． TIMER: The timer function allows you to set the length of operation from 0.5 hour to 7.5
hours. Pressing the 'TIME' button will increase the length of operation by 0.5 hour each time.
(As shown in FIGURE 6)
9. To turn the heater off, press the 'POWER' button, and the unit will work in the COOL FAN
MODE for 30 second then turn off by itself.

REMOTE CONTROL

1. Install two "AAA" batteries as shown in FIGURE 7.
2. The Remote Control Power button is labeled as such. All the functions performed with the
Remote Control work identically to the Manual Controls.

SAFETY FEATURES

1. A thermal overload protector is built in to prevent overheating.
(Besides the 70 degree, Auto oscillation, There is a 60
)
(As shown in FIGURE 5)
4