Remote Control; Batteries Instructions - SPT SH-1516D Owner's Manual

REMOTE CONTROL

Up Button
Down Button
Mode Button
BATTERIES INSTRUCTIONS (included)
1. Please push locking latch in the direction of Arrow A, and pull out the pull notch in the direction
of Arrow B at the same time.
2. Use 1 "CR2032" lithium battery (included)
3. Insert the batteries, making sure that the positive terminals are facing the proper way.
4. Replace the cover.
BATTERY WARNING
1. Do not dispose of batteries in fire, batteries may
explode or leak.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
4. Non-rechargeable batteries are not to be recharged.
5. Batteries are to be inserted with the correct polarity.
6. Exhausted batteries are to be removed from the product.
7. The batteries must be removed from the remote controller before it is scrapped
and that they are disposed of safely.
Battery installation Battery installation
Pull Notch Pull Notch
B
Locking Locking
latch latch
A
3
ON/OFF Button
Timer Button
Swing Button
B