Table of Contents
Advertisement
2. When an overheat temperature is reached, the heater will be automatically shut off. It can
only resume operation when the user resets the unit. (See reset instruction below)
3. If the unit is tilted, a safety system will automatically cut off the power, put the unit in a
vertical position and it will operate again.
To Reset Heater:
1. Unplug the heater and wait 5-10 minutes for the unit to cool down.
Then, turn on the unit again and operate normally.
2.
MAINTENANCE
WARNING:
ALWAYAS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE HEATER IN WATER.
CLEANING:
IMPORTANT! DO NOT IMMERSE HEATER IN WATER!
Take the Air Inlet and the Air Filter off, clean the Air Inlet with the vacuum brush
attachment on your Vacuum cleaner, and wash the Air Filter in warm water and
dry it. DO NOT DRY AIR FILTER IN DIRECT SUNLIGHT. Clean the body of the
Heater with a soft cloth.
CAUTION:
Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage
the heater. NEVER use ALCOHOL or SOLVENTS.
STORAGE:
Store the heater with these instructions in the original in a cool, dry place.
Please contact us directly with any Service or Technical Assistance
21415 Baker Parkway, City of Industry, CA 91789
DEFECTIVE NOTICE
If this product is defective or not working properly
Please DO NOT return to your retail store
Contact us toll free at:
SUNPENTOWN INTERNATIONAL INC.
1(800) 330-0388
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SH-1508 and is the answer not in the manual?
Questions and answers