Often Encountered Problems - Hitachi VT-UX605A Owner's Manual

Care and Servicing (Problems)
For more information about how to obtain these accessories, please call TOLL FREE 1-
800-448-2244 for your nearest Hitachi Authorized Parts Distributor in the continental
United States. For ALASKA and HAWAII, please contact the nearest Hitachi Regional
office.
Design and specifications subject to change without notice.

Often Encountered Problems

Problem
No Power.
Delayed
recording does
not work.
Delayed
recording does
not work even
when the clock
is set correctly.
Does not record
when you press
REC.
TV program
cannot be
viewed or
recorded.
VCR's display lights Was "1 CLOCK SET
for several seconds
after the power is
turned off.
Problem
Things to Check
Power cord plugged in?
Program set to the correct
channel?
Program time and date set
correctly?
VCR power turned off?
Safety tab removed from
the videocassette?
Clock set to "--:--"?
Has power failure of more
than one hour occurred?
Safety tab removed from
the videocassette?
Loose or inappropriate
connections between VCR
and TV?
<AUTO>" specified from
the CLOCK SET screen?
Things to Check
Solution
Connect the power
cord to AC outlet.
Reset the delayed recording.
Reset the delayed recording.
Turn power off to activate the
timer.
Put cellophane tape over the
tab area, or use a videocas-
sette with the safety tab
intact.
Set the time, then program
delayed recording.
When the auto clock set
function is operating, the
time may be reset even after
a power failure of more than
one hour. However, pro-
grammed delayed record-
ings will have been cleared
and must be reset.
Put cellophane tape over the
tab area, or use a videocas-
sette with the safety tab
intact.
Review hookup directions
and make correct, firm con-
nections.
The auto clock set function is
operating. This does not
indicate a fault.
Solution
- 73 -