Table of Contents
Advertisement
Basic Operations (Tape Navigation)
2. Turn the TV on and select the video channel (3 or 4).
3. Make sure that the green MENU button indicator on the VCR lights. (It lights to show
that Tape Navigation is operational.)
4. Press the MENU button on the remote control or VCR. The directory will appear. The
directory interpretation is listed on the next page.
This VCR can store about 80 programs including blanks in memory.
There may be a difference of within about three minutes between the displayed
recording time and the actual time.
The recording data may not appear even with a tape recorded by this VCR. In this
case, perform the following:
A, Rewind the tape to the beginning and press the MENU button.
B, Rewind or fast forward the tape to the section which was recorded by this VCR, then
press MENU.
Interpreting the Directory
Tape No.:
No. of Programs:
Tape Bar:
Recording Time:
Recording Channel/Recording Date/Recording Day of the Week/Recording Start
Time/Program Title:
If the broadcast program does not have a program title signal, these will be displayed.
If the clock has not been set, "- - / - -" "- - : - -" will be displayed.
If you use a cable box to receive programs, the VCR's output channel is always displayed
whichever channel is recorded.
When a broadcast program with a program title signal is recorded, program title appears. If
the title is too long, all the title characters may not be displayed
Operating Guide:
Blank:
recording is possible in the EP speed mode.
Program No.:
white background).
Mark Showing That You Have Viewed the Program (
Shows the tape control number
Shows the number of recorded programs on the tape
Shows the length of a recorded program and its location on
tape.
Shows the actual recording time. If the tape speed (EP/SP)
is changed during recording, the recording mode indicator
is switched to "- -" and the recording time in the EP mode
will be displayed.
Shows the button names and the operations that can be
done when the directory is being displayed.
Shows the non-recorded section (time for which a new
recording can be made). Displays the time for which
Shows the registered number of a recorded program. The
selected number is displayed, inverted (in black against a
Shows that you have already viewed more than half of the
):
- 50 -
Advertisement
Table of Contents
