Viewing The On-Screen Display; Switching Between The Clock, Time Counter And Time Of Remaining Tape - Hitachi VT-FX6404A Owner's Manual

While playing back your tape you can skip forward by pressing the
button.
The tape will search ahead for about a minute and then resume play.

VIEWING THE ON-SCREEN DISPLAY

Switching between the clock, time counter and time of remaining tape

Press DISP while the on-screen display is displayed. The on-screen display switches in the order below.
Press the DISP button to see the clock.
Press the DISP button a second time to see just the time counter.
Notes:
• The linear time counter operates only if there is something recorded on the tape.
• The counter changes to 0:00:00 when the tape is ejected.
Press the DISP button a third time to see the tape remaining time.
Note: Immediately after the tape is inserted, "
started, the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of tape is used. The correct remaining time will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
-:--
" will appear. 2 minutes after playback or recording is
(VIEW/SKIP/BLANK)
42