Delayed Recording; Setting The Vcr To Record Later; Before You Begin - Hitachi VT-DX815A Owner's Manual

DELAYED RECORDING

DELAYED RECORDING

Setting the VCR to record later

Note: The cassette safety tab must be in place in order to record.
To re-record on a cassette
which has its safety tab
removed.
Cover the hole with cellophane
tape.

Before you begin

Assemble the information you need for timed recording:
• Be sure that the clock is set to the correct time
• Date and day of the program
• Starting time
• Ending time
• Channel to be recorded
• Blank or erasable videocassette (safety tab intact)
Method for programming a DSS® program for delayed D-VHS
recording
• Insert a D-VHS tape into the VCR.
• Connect the VCR and DSS® box via a digital A/V cable.
• Use the DSS® box to select the program for delayed D-VHS recording.
(Refer to the DSS® box manual.)
• Turn off the VCR.
Note: Any section guarded against copying (where a copy protect signal is
inserted) will be recorded in the VHS format.
Delayed Recording Steps
You set up the delayed recording using the on-screen Easy Guide
System.
1 Insert blank or erasable tape.
With the delayed recording feature, you can set this
VCR so that it automatically turns on and records
programs whenever you like – without your being
around! You can record a program one time only, or
you can automatically record a show every weekday
or every week at the same time. You can preset as
many as 8 timed recordings at once.
64