Instant Recording Timer; Using The Instant Recording Timer (Irt) - Hitachi VT-DX815A Owner's Manual

Hitachi owner's manual vcr vt-dx815a

Table of Contents

INSTANT RECORDING TIMER

The Instant Recording Timer (REC/IRT button on the VCR) will let you

make a simplified timer recording without having to use the programming

timer. In order to set the IRT properly the clock must be set before

starting.

1 Follow the steps 1 through 5 on "VHS recording step".

2 Press the REC/IRT button twice to indicate the recording time on

the display.

REC/IRT Settings Illustration pic

• You may increase the recording time by 30 minutes each time you press

the REC/IRT button.

• While you are recording, the remaining recording time is shown on the

VCR display.

• At the end of your recording, the display will read "0:00", recording will

stop automatically, and the VCR will turn itself off.

To stop recording while in the IRT mode:

1 Press the POWER button.

2 Press the STOP button within 10 seconds.

pic

• This can be done either on the VCR or with the remote control.

Table of Contents