To Change Clock Setting - Hitachi 13VR10B Owner's Manual

PRESET FOR USE
5 Select the year
Press CH
(Example: 1996)
Then, press SELECT button.
6 Select the hour
Press CH
(Example: 5, PM)
Then, press SELECT button.
7 Set the minute
Press CH
(Example: 40)
8 Start the clock
Press MENU or SELECT button.
Although seconds are not displayed, they begin counting from 00 when you
press MENU or SELECT button. Use this feature to synchronize the clock
with the correct time.
• This unit has a built in calendar up to the year 2010.

TO CHANGE CLOCK SETTING

If you want to change the clock,
1) Follow steps [1] and [3]
2) Select a digit you want to change using SELECT button or ADD/DELETE
button.
3) Enter correct numbers using CH
4) Press MENU button to start the clock.
HINT!
If there is no local PBS station in your area or on your cable system, in step 2
above, select "AUTO CLOCK" and press CH
then adjust clock manually.
or button repeatedly until your desired year appears.
or button repeatedly until your desired hour appears.
or button repeatedly until the desired minute appears.
or button.
or button to show [OFF],
25