Setting The Clock - Hitachi 13VR3B Operating Manual

SETTING THE CLOCK

SETTING THE CLOCK
This is important for your future timed recordings.
You'll need to set the clock when first hooking up your TV/VCR Combination
and when the clock is cleared by a power outage, etc.
When you first plug in the TV/VCR Combination or after a power outage, the
clock display will read "--:--".
Remote Control Buttons
1. Press the MENU button.
The menu will appear as an on screen display.
2. Press the 1 key on the remote control.
The set up screen will appear.
3. Press the 2 key on the remote control.
The INITIAL SETTING screen will appear.
4. Press the 4 key on the remote control.
The CLOCK SET screen will appear.
5. To set the hour, minute(s), AM or PM, enter two digits for the hour, two digits
for the minute(s) and "8" for AM or "9" for PM.
For example, for 9:30 PM,
press Numeric keys 0 9 3 0 9.
6. To set the month, day, year, enter two digits for the month, two digits for the
day, and two digits for the year.
For example, for July, 1st, 1995,
press Numeric keys 0 7 0 1 9 5.
7. Press the MENU button. This starts the clock and the TV screen will return to
the INITIAL SETTING screen.
21