Motion Detection - Samsung SNV-7080 User Manual

setup screen
5. Specify an operation that will perform if an alarm occurs.
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
• E-mail sending : Specify the use of email transfer in the alarm input setup.
• FTP sending : Specify the use of FTP transfer in the alarm input setup.
• Record : Specify the use of recording in the alarm input setup.
6. When done, click [Apply (

Motion detection

1. From the Setup menu, select the
<Event (
2. Click <Motion detection>.
To set the Motion Detection
1. Specify the use of motion detection.
2. Select a sensitivity level of the motion
detection.
3. Place the cursor at a point in the video
and drag it to whatever you need.

You can specify up to 4 motion detection
areas.
4. Specify the activation time and
activation condition.

For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 63)
5. When done, click [Apply (
64_ setup screen
)> tab.
)].
)].