Samsung SNV-7080 User Manual page 12

overview
Inside
Item
Monitor Out
Reset Button
SD Memory Card
Compartment
12_ overview
Using the test monitor cable, you can connect to a mobile display for camera
test.
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
Compartment for the SD memory card.
Description
3