Telstra Big Pond - Edimax nLite 3G-6200N User Manual

Idle Time Out
Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the L2TP
connection. You can start using the router now, if you wish to use some
of the advance features supported by this router see chapter 2, 3, 4.

1.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond
protocol to connect you to the Internet. Your ISP should provide all the
information required in this section. Telstra Big Pond protocol is used by
the ISP in Australia.
router will connect to ISP only when you click
"Connect" manually from the Web user interface.
The WAN connection will not be disconnected due
to the idle timeout. If the WAN line breaks down and
latter links again, the router will not connect to the
ISP by itself.
The WAN "idle timeout" auto-disconnect function
may not work due to abnormal activities of some
network application software, computer virus or
hacker attacks from the Internet. For example,
some software sends network packets to the
Internet in the background, even when you are not
using the Internet. This function also may not work
with some ISP. So please make sure this function
can work properly when you use this function in the
first time, especially your ISP charge you by time
used. Due to the many uncontrollable issues, we do
not guarantee the WAN "idle timeout"
auto-disconnect function will always work. In order
to prevent from extra connection fee, please TURN
OFF THE ROUTER WHEN YOU ARE NOT USING
INTERNET.
38