Assembly - Ryobi RT102 Operator's Manual

UNpaCKING
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
WarNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to heed
this warning could result in serious personal injury.
1
5
paCKING LISt
1. Table leg (4)
. Socket head screw (19)
3. Lock washer (16)
4. Flat washer (6 mm) (19)
5. Switch box assembly (1)
6. Hex key (1)
7. Fence assembly (1)
8. T-handle wrench pointer (1)
9. Under table guard (1)
10. T-wrench (1)
11. Router table (1)

aSSeMBLY

11
2
10
3
4
9
8
7
6
WarNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WarNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
WarNING:
The undertable guard and router guard must be securely
in place before using the router table. Failure to do so
could result in serious personal injury.
12
13
14
1. Fence lock knob ()
13. Fence lock knob washer ()
14. Carriage bolt ()
15. Router guard (1)
16. Guard screw ()
17. Miter gauge (1)
18. Pan head screw ()
19. Washer (4 mm) ()
0. Throat plate (5)
1. Flat head screw (3)
. Starting pin (1)
3. Operator's Manual (not shown)
9
15
16
18
19
17
20
21
22
Fig.