Change Tv Preferences; Start A Tv Demo; Reset The Tv To Factory Settings - Philips 32PFL5604/77 User Manual

Update software (analog broadcasts)
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
• Have available a USB storage device with
at least 64MB of storage space.
• Have access to a computer with a USB
port and internet access.
1
Press ( Home ).
2
Select [Setup] > [Software update] >
[Update assistant] .
3
Select [Start] .
4
Connect the USB storage device to your
computer.
5
Follow the on-screen instructions to
complete the update.

Change TV preferences

The [Preferences] menu allows you to
customize various features and functions.
1
Press ( Home ).
2
Select [Setup] > [Installation] >
[Preferences] .
• [Location] : Optimizes TV settings
for your location - home or shop.
• [Volume bar] : Displays the volume
bar when adjusting the volume.
• [EasyLink] : Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [Pixel Plus Link] : Overrides the
settings of connected devices and
uses the settings of the TV.
• [E-sticker] : For shop mode only.
Sets the location of the e-sticker.
18 EN

Start a TV demo

You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
When a demo is available, it is displayed in the
menu list.
SUBTITLE SUBTITLE
TV TV
DEMO DEMO SCENEA SCENEA
1
Press DEMO on the remote control.
2
Press to select a demo and press OK
to view it.
3
Press DEMO to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. Channel installation settings
remain the same.
1
Press ( Home ).
2
Select [Setup] > [Installation] > [Factory
settings] .
3
Press OK or
settings] menu.
»
[Reset] is highlighted.
4
Press OK to reset to factory settings.
5
Press ( Home ) to exit.
INCR.SURR INCR.SURR SOURCE SOURCE
CC CC SAP SAP
to enter the [Factory