Table of Contents
Advertisement
Update using OAD
1
If using (DVB-T) digital broadcast, your
TV automatically receives software
updates. If you receive a message on
your screen asking you to update your
software:
•
Select
[Update now] to update the
software immediately.
•
Select
[Remind me later] to exit the
update screen at that time and be
reminded later.
•
Select
[Cancel] to skip the update.
2
If you select [Cancel], you can manually
access the OAD update by selecting
[Setup] > [Software update] > [Local
updates] > [OAD].
3
Select the available version of OAD and
press OK.
4
Follow the on-screen instructions to start
the update.
Note
•
The TV restarts after the software update is
complete.
Change TV preferences
Use the preferences menu to customise your
TV settings.
1
Press
MENU.
2
Select [Setup] > [Installation] >
[Preferences].
•
[Location]: Optimises TV settings for
your location - home or shop.
•
[Volume bar]: Displays the volume
bar when you adjust the volume.
•
[Channel info.]: Displays information
about the TV channel every time you
switch channels. Select [Full] to view
channel information or [Off] to turn
off the channel information.
•
[Universal access]: Enables or
disables the universal access menu.
•
[EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
•
[Pixel Plus Link]: Overrides the
settings of connected devices and
uses the settings of the TV.
(Only available if EasyLink is switched
on.)
•
[Teletext 2.5]: Enables or disables
Teletext 2.5. (For digital TV)
•
[E-sticker]: For shop mode only. Sets
the location of the e-sticker.
3
Press
to select your preference.
4
Press OK.
5
Press
MENU to exit.
EN
25
Advertisement
Table of Contents
