Making an SDM Call
SDM Calls may be initiated in three different
ways:
Via the keypad using a Call modifier
1.
Via the Contact List
2.
Note: The maximum data message size is limited
to 20 characters which includes address
information and data selection characters.
Data entered via the call modifier method
may be alphanumeric characters entered
from the keypad.
In the contact list method data may consists
alphanumeric
preprogrammed into your radio by your
dealer.
characters
which
are
To initiate a data call via the keypad:
*2* Part of modifier
1
2 Enter message from keypad in
alphanumeric characters (ref pages 8 & 9)
*
Final part of modifier
3
4 Enter
Called radio address
5 Display shows:
+ or e to
scroll message: (where NNNNN is called
radio address.)
6 Press PTT button or # to make a call
to the dialled numbers
Tone D sounds
Display shows:
7 Press CLEAR button or *# at any
time to delete dialled numbers and return
radio to IDLE STATE when tone H sounds
*2*Call Bryan
ASAP*NNNNN
Sending Data
Number
English
39