Table of Contents
Advertisement
CHARGING
1.
Make sure the adapter and telephone line cord are connected to the 31070.
2.
Place the handset on the base cradle. The CHARGE LED indicator of the
base unit will light steadily.
3.
Leave the handset charging on the base for 14 hours continuously to get a
maximum charge.
4.
The 31070 is now ready for regular use. Discharge and charge the Ni-Mh
battery again once you notice a decrease in the useable charge time.
MAINTENANCE
1.
Your phone should be situated away from heat sources such as radiators,
heaters, stoves or any other appliance that produces heat.
2.
Use a slightly damp cloth to clean the plastic cabinet. A mild soap will
help to remove grease or oil. Never use polish, solvents, abrasives or
strong detergents since these can damage the finish.
TECHNICAL INFORMATION
This cordless phone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are
normal, the following could affect the operation of your system.
NOISE: Electric pulse noise is present in most homes at one time or another.
This noise is most intense during electrical storms. Certain kinds of electric
equipment such as light dimmers, fluorescent bulbs, motors, and fans also
generate noise pulses. Because radio frequencies are susceptible to these noise
pulses, you may occasionally hear them in your handset. Generally, they are
minor annoyances and should not be interpreted as defects in your system.
RANGE: Because radio frequencies are used, location of the base unit can
affect operating range. Try several locations in your home or business and pick
the one that gives you the clearest signal.
46
061210B-1
Hide quick links:
Advertisement
Table of Contents
