5.
Press [MENU/OK Button].
6.
Press [UP or DN Button] to select TONE or PULSE.
7.
Press [MENU/OK Button] to confirm.
8.
Press [TALK OFF Button] to return to idle mode.
FLASH TIME SETTING
The user can select to change the Flash Time.
1.
Press [MENU/OK Button].
2.
Press [UP or DN Button] to select "BS SETTING".
3.
Press [MENU/OK Button].
4.
Press [UP or DN Button] to select "FLASH TIME".
5.
Press [MENU/OK Button].
6.
Press [UP or DN Button] to select 100MS, 250MS, 300MS or 600MS.
7.
Press [MENU/OK Button] to confirm.
8.
Press [TALK OFF Button] to return to idle mode.
MODIFY PIN SETTING
This function allows the user to change the pin number of the currently active
Base.
1.
Press [MENU/OK Button].
2.
Press [UP or DN Button] to select "BS SETTING"
3.
Press [MENU/OK Button].
4.
Press [UP or DN Button] to select "MODIFY PIN".
5.
Press [MENU/OK Button].
6.
Enter PIN NUMBER. (The factory default is "0000")
7.
Press [MENU/OK Button]. The LCD will show "NEW PIN".
8.
Enter the new pin number.
9.
Press [MENU/OK Button]. The LCD will show "CONFIRM".
10. Enter the new pin number again.
11. Press [MENU/OK Button] to confirm.
12. Press TALK OFF Button] to return to Idle mode.
36
061210B-1