Product Information - Philips CEM2101/12 User Manual

9 Product
information
Note
•
Product information is subject to change without prior
notice.
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Aux-in level
Dimensions (W x H x D)
Weight
Radio
Frequency range - FM
Frequency range -
AM(MW)
Usable sensitivity - FM
Usable sensitivity -
AM(MW)
Compatible USB devices:
• USB flash memory: USB 1.1 host with
interface reading all speed support
(1.1, 2.0)
• USB flash players: USB 1.1 host with
interface reading all speed support
(1.1, 2.0)
Supported formats:
• USB or memory file format: FAT12,
FAT16, FAT32
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
EN
21
12 V DC (11 V - 16 V),
negative ground
15 A
4 - 8
40 W x 4 channels
21 W x 4 RMS (4
10% T.H.D.)
2.5V
500 mV
181.5 x 52 x 191.4 mm
1.47 kg
87.5 - 108.0 MHz
522 - 1620 KHz (9 kHz)
530 - 1710 kHz (10 kHz)
8 µV
30 µV
• WMA V4, V7, V8, V9 (L1, L2)
• MP3 sampling frequencies: 8-48 kHz
• MP3 Bit-rates: 8~320 (kbps), variable
bit rates
• WMA sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
• WMA Bit-rates: 32~192 (kbps),
variable bit rates
• Directory nesting up to a maximum of
8 levels
• Number of albums/folders: CD
maximum 99, USB or memory
maximum 99
• Number of tracks/titles: CD maximum
999 (depending on number of album),
USB or memory maximum 999
• ID3 tag v2.0 or later
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and is not be shown in the
display.
• Unsupported file formats are skipped.
For example, Word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format