Table of Contents
Advertisement
Unloading a Cartridge
The cartridge can be removed from the AITi520, AITi390, AITi260,
AITi130 and AITi90 either in response to a SCSI Unload Command, or by
pressing the EJECT bottom.
By pressing EJECT button, the tape is rewound and the cartridge ejected
from the slot.
Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the
cartridge. In this state, data can be read from the tape but not written onto it.
AIT-1
26
AIT-2
AIT-3
AIT-3 Ex
AIT-4
Using your fingernail, push the switch in the
direction of the arrow to protect the tape from
writing or accidental erasure.
Return the switch to its original position to
re-enable writing.
Advertisement
Table of Contents
