Table of Contents
Advertisement
Unloading a Cartridge
The cartridge can be removed from the AITi1040, AITi1040V, AITi520,
AITi520V, AITi390, AITi390V, AITi260, AITi260V, AITi130, AITi130V,
AITi90, and AITi90V drives either in response to a SCSI Unload
Command, or by pressing the EJECT bottom.
By pressing EJECT button, the tape is rewound and the cartridge ejected
from the slot.
Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the
cartridge. In this state, data can be read from the tape but not written onto it.
AIT-1
AIT-5
AIT-4
AIT-3 Ex
AIT-3
AIT-2 Turbo
AIT-2
AIT-1 Turbo
AIT-E Turbo
Using your fingernail, push the switch in the
direction of the arrow to protect the tape from
writing or accidental erasure.
Return the switch to its original position to
re-enable writing.
29
Advertisement
Table of Contents
