Zoom PFX-9003 Operation Manual page 29

parameter PATLVL (patch level) of the TOTAL module will be selected.
3.
Use the CURSOR [
want to edit.
Modules for editing are switched in the order shown below. Modules with
many parameters (DRIVE, EQ, ARRM etc.) have multiple pages for making
parameter settings. For such modules, the CURSOR [
used to switch between pages.
COMP
Module
Page
COMP DRIVE CABI
In the lower part of the display, the dot (
flashing (except for the TOTAL module). For most modules, the currently
selected effect type is shown on the upper part of the display.
Effect type
H
INT
• The ARRM module and the TOTAL module are not standalone modules. The
ARRM module comprises only ARRM function settings, and the TOTAL module
serves for setting the patch level and patch name.
• When the PATCH NAME page of the TOTAL module is selected, the CURSOR [
R
[ ] keys can be used to select the character of the 6-character name that is to be
changed.
4.
To switch the selected module on or off, press the [TUNER/
BYPASS] key while the effect type for that module is displayed.
The effect type indication changes to "-OFF-". To turn the effect module on
again, press the [TUNER/BYPASS] key once more.
ZOOM PFX-9003
E R
]/[
DRIVE ZNR
ZNR EQ1
ROOM
Changing the Sound of a Patch (Edit Mode)
] keys to select the module that you
EQ MOD REV
EQ2 MOD REV
●
) symbol of the selected module is
E R
]/[ ] keys can be
ARRM TOTAL
PATCH
ARRM1 ARRM2
LVL
Selected module
PATCH
NAME
E
]/
29