Storage; Maintenance - Stamina Seated Inversion Therapy System Owner's Manual

STORAGE

1. To store the Seated Inversion Therapy System, simply keep it in a clean dry place.
2. Move the Seated Inversion Therapy System by lifting the frame and moving slowly.
NOTE: Two people are required to move the Seated Inversion Therapy System.

MAINTENANCE

The safety and integrity designed into the Seated Inversion Therapy System can only be maintained
when the Seated Inversion Therapy System is regularly examined for damage and wear. Special
attention should be given to the following:
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Check the security belt, seat belt, pivot arms, cushions, foam pads, adjustment pin, and lever device
for damage and wear.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Worn or damaged components shall be replaced immediately or the Seated Inversion Therapy
System removed from service until repair is made.
5. Verify that the WARNING LABEL(64) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(64) if it is missing or damaged.
6. Only Stamina Products supplied components shall be used to maintain/repair the Seated Inversion
Therapy System.
7. Keep your Seated Inversion Therapy System clean by wiping with an absorbent cloth after use.
15