Stamina Seated Inversion Therapy System Owner's Manual page 13

OPERATIONAL INSTRUCTIONS
FOAM PAD USE AND LEVER ADJUSTMENT
1. Place your feet under the FOAM PADS(20) with your ankles
between the FOAM PADS(20).
2. Pull the KNOB(19) and swing the LEVER(13) toward you until
your ankles are comfortably yet firmly held between the FOAM
PADS(20).
3. To release your feet or relax the grip, pull the KNOB(19) and
swing the LEVER(13) forward.
LEG HEIGHT ADJUSTMENT
Proper adjustment of the LEG ADJUSTMENT FRAME(12) is very
important.
1. Loosen the ADJUSTMENT KNOB(23) on the SWING BAR(11).
2. Pull the ADJUSTMENT KNOB(23) and slide the LEG
ADJUSTMENT FRAME(12) to adjust.
3. Sit on the machine to make sure you feel comfortable with the
FOAM PADS(20).
4. Tighten the ADJUSTMENT KNOB(23) after adjustment.
THE SEAT BELT
CAUTION: Always use the SEAT BELT(31). Make sure the SEAT
BELT(31) is securely fastened before inverting.
Sit on the SEAT(32). Place both ends of the SEAT BELT(31) on top
of your upper legs and connect the buckles of the SEAT BELT(31).
13