Westerbeke 20.0KW sbeg Operator's Manual page 31

OPTIONAL REMOTE OIL FILTER
(PN #052537)
INSTALlATION
This popular accessory is used to relocate the engine's oil
filter from the engine to a more convenient location such as
an engine room bulkhead.
NOTE:
Refer to ENGINE OIL CHANGE in this manual for
instructions on removing the oil filter.
APPLY A TIIM COAT OF ClEAN OIL TO THE O.ftING WHEN
INSTALU;;;.NG~N.naiDDs'iTillllioi'MTHl.R:i!EAD4
THE KIT ON, THEN HAND
~
TURN AFTER THE O-RING
NOTE:
~~~~tl!~~~;~~~~:~~
ONTHE~
ARE
'REMOVED FOR INSTALLATIONS SO THEY
WlU BE RECONNECTm CORRECTLY.
To install, simply remove the engine oil filter and thread on
WESTERBEKE's remote oil filter kit as shown. Always
install this kit with the oil filter facing down as illustrated.
Contact your WESTERBEKE dealer for more information.
NOTE: Westerbeke is not responsible for engine failure due to
incorrect installation of the Remote Oil Filter.
FASTEN SECURELY TO A BULKHEAD
(SCREWS ARE Suppum)
APPLY A THIN COAT OF OIL TO THE
FILTER GASKET WHEN INSTALUNG. AFTER THE
FILTER CONTACTS THE BASE, TIGHTEN IT AN
ADDITIONAL 3/4 TURN.
Engines
&
Generators
19