Displaying The Status - Hitachi CP-X267 Network Manual

3 . Using the Live Mode
3.7 Start the "Live Viewer 3" (continued)

3 .7 .2 Displaying the status

1) Indicator
The indicator shows the following status.
Indicator
2) Status Display in Multi PC mode
The icon is displayed at the right end of the Display mode buttons.
One of the following icons to inform which quarter screens are used will be
shown.
No PC is on screen
One PC is on screen.
Two PCs are on screen.
Three PCs are on screen.
Four PCs are on screen.
NOTE
• The status display is refreshed in every 3 seconds.
• If the status cannot be gotten from the projector, it will not be displayed.
56
Status
Not connected
Hold
Connected
Disconnected
Status
The network connection to the projector is
not established yet.
The network connection is established, but
the image transmissions on hold.
The network connection is established and
the images on the PC are being sent to the
projector.
The network connection to the projector is
disconnected.
Note
Status icon