Hitachi CP-X267 Network Manual page 33

3.4 Passcode connection (continued)
Method 2
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on
the projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►
cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button
to enter the item.
5) Use the ▲/▼ cursor buttons to select the INFORMATION, and use the ►
cursor button to display the INFORMATION.
6) The Passcode is appeared at the top right corner in the INFORMATION
window.
NOTE
• Take the Method 2 , when you use the projector in the LIVE MODE
or PC-LESS Presentation mode, or when the MIU is not selected as the input
signal.
• If no communication between the projector and PC in 5 minutes, the Passcode
will be changed.
3 . Using the Live Mode
33