3.5 Manual configuration (continued)
Wired LAN
1) Enter the following information for the
projector. *1
IP Address : 192.168.1.10 (example)
Subnet mask : 255.255.255.0 (example)
2) Click [Connect].
3) The network connection will be established.
Proceed to the item 3.6 Confirm the connection to your destination. (50)
*1 To find the network setting on the projector, refer to the NOTE. (40)
[trouble shooting]
n A network connection could not be established.
Windows prevented network configuration
changes.
You may log in the Windows under User
authority.
Click [OK], then the "Live Viewer 3" main
menu is displayed even though the network
is not established. Click
and go back to the item 3.3.3 Connecting to
the network. (31)
Consult to the network administrator. Log in the Windows under Administrator
authority. After that, please resume at the item 3.3.1 Starting the "Live Viewer
3". (26)
on the main menu
3 . Using the Live Mode
47