Palm Rest - Dell Inspiron 8600 Service Manual

Back to Contents Page

Palm Rest

Dell™ Inspiron™ 8600 Service Manual
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in "Preparing to Work Inside the
2. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the display hinges pass through the back of the palm rest.
3. Remove the display assembly.
4. Remove the microprocessor thermal-cooling
5. Remove the video card.
6. Remove the 13 M2.5 x 12-mm screws from the bottom of the computer.
1 M2.5 x 12-mm screws (13)
7. Remove the two M2.5 x 4-mm screws from the top of the palm rest.
Computer."
assembly.