Back to Contents Page
Front-Panel Inserts
Dell™ OptiPlex™ GX400 Service Manual
Removing Front-Panel Inserts
Replacing Front-Panel Inserts
Removing Front-Panel Inserts
CAUTION:
Before you perform this procedure, see
1. Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then
2.
Remove the front
panel.
3. Hold the front panel with the front facing you.
4. Remove the front-panel insert for the chassis drive bay you want to use.
Use your thumbs to press the sides of the insert until it snaps free of the front panel.
Removing Front-Panel Inserts
Replacing Front-Panel Inserts
Position the two ring-tabs over the posts on the inside of the bay opening, and then press the ring tabs over the posts. See
Back to Contents Page
"Precautionary
Measures."
remove the computer
cover.
"Removing Front-Panel
Inserts."