Removing Front-Panel Inserts - Dell Precision Workstation 340 Service Manual

Hide thumbs Also See for Precision Workstation 340:
Table of Contents

Advertisement

Back to Contents Page
Front-Panel Inserts
Dell Precision™ WorkStation 340 Service Manual

Removing Front-Panel Inserts

 
CAUTION:
Before you perform this procedure, see
1.  Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 10 to 20 seconds, lay the computer on its side, and
the computer
cover.
2.  On the small desktop computer:
a.  Face the front of the computer and use your fingers to remove the front-panel cover.
b.  Press on the insert until it pops free of the front-panel cover.
3.  On the mini-tower computer:
a.  Open the cover to a 90-degree angle and release the insert tabs from inside the computer.
b.  Press on the insert until it pops free of the front-panel cover.
 
Small Desktop Computer
 
 
Mini-Tower Computer
 
"Safety First—For You and Your
Computer."
open

Advertisement

Table of Contents
loading

Table of Contents