Quick Guide For Analog Menu Operation; Selecting The Video Input Source; On-Screen Language Selection - Toshiba 19DV615DG Owner's Manual

Quick guide for ANALOG MENU operation/Selecting the
video input source/On-screen Language Selection
Make sure the aerial connection and
power supply are connected as per
the description on previous page.
Preparations:
• Turn on the unit with the
on the unit. The
will light up in green.
To change the unit to standby mode,
press on the remote control.
(Power) indicator will change
from green to red. To turn on the unit
from standby mode, press
remote control again.
In standby mode, you can also turn
the unit on with
on the unit or PAGE
the remote control.
To turn off the unit press
on the unit - to completely switch
it off, disconnect the mains power
supply.
• Press TV/DVD to select the TV mode.
• Press ATV/DTV to select the
analogue TV mode.
Note:
• If no buttons are pressed for more
than approx. 60 seconds, the MENU
disappears automatically.
52R0131A_ENG.indd 11 52R0131A_ENG.indd 11

Quick guide for ANALOG MENU operation

Call ANALOG MENU and for example: Select AUTO TUNING.
1
Press INPUT.
Select ATV. Press MENU.
2
button
Press ◀ or ▶ to select
(Power) indicator
on the
3
Press ▲ or ▼ to select AUTO
TUNING, then press ENTER to
(Channel) or
enter the AUTO TUNING menu.
/ on
... on the following pages the MENU
button
can be called in the same way as
here.
4
Press EXIT to return to the normal screen.

Selecting the video input source

Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select each input source depending on
which input jacks you used to connect
your devices.
To select the video input source, press ▲
/▼. Then press ENTER within 6 seconds.
• You can return to ATV mode by pressing a numbered button
even if you switched to external input mode from DTV mode.

On-screen Language Selection

1
Select LANGUAGE (unless you
have already selected when the set
was first switched on).
Then press ENTER.
2
Press ◀ or ▶ to select the desired language.
3
Press EXIT to return to the normal screen.
.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
INPUT SELECT
ATV
DTV
AV1
AV2
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
ENGLISH
0
4:3
0
4:3
0
4:3
11
4/3/09 11:08:22 AM 4/3/09 11:08:22 AM