Removing The Front Bezel; System Feet-Tower Mode - Dell PowerEdge T420 Owner's Manual

Figure 11. Removing and Installing the Front Bezel
1. system
2. front bezel
3. keylock
4. release latch

Removing The Front Bezel

1. Insert the bezel key in the keylock.
2. Keeping the keylock pressed with the bezel key, rotate the keylock to the unlocked position.
3. Press down on the release latch at the top of the bezel.
4. Rotate the top end of the bezel away from the system.
5. Unhook the bezel tabs from the slots on the front of the chassis.
System Feet—Tower Mode
The system feet provide stability to the system in the tower mode.
42