Whirlpool RF366PXY Use And Care Manual page 30

PROBLEM POSSIBLE CAUSE SOLUTION
Control knob(s) You are not pushing in
Push control knob(s) in before turning to a
will not turn
before trying to turn.
setting.
Self-Cleaning The Oven Selector and Set both the Oven Selector and Oven
cycle will not Oven Temperature Control
Temperature Control Knob to CLEAN.
operate Knob are not set to CLEAN.
The range clock does not
Reset clock to show the correct time of
show the correct time of day. (See page 11.)
day.
The Lock Lever is not in the Move the Lock Lever all the way to the
CLEAN position-all the way
right.
to the right.
The Start Time Dial does Reset the Start Time Knob to show the
not show the correct time of
correct time of day. Pull knob out all the
day or the knob is not all way.
the way out.
The Stop Time Dial is not See Step 3 in "Setting the controls" on
set ahead to the time you page 22 for proper setting instructions.
want the cleaning cycle to
stop.
Cooking The range is not level. Level range. (See Installation Instruc-
results are not tions.)
what you
expected
The oven temperature Adjust the oven temperature control. (See
seems too low or too high. "Adjusting the oven temperature control"
on page 13.)
The oven was not pre-
heated as the recipe calls
for.
Preheat oven if called for in recipe.
The recipe has never been
Use only tested recipes from a reliable
tested or is not from a source.
reliable source.
The pan used is not the
Refer to a reliable cookbook for recom-
type or size recommended mended pan type and size.
in the recipe.
There is not proper air Allow 1% to 2 inches (4-5 cm) on all sides
circulation around pan of the pans for air circulation. There must
when baking.
be a minimum space of 1 inch (2.5 cm).
The cooking utensils are Use cooking utensils with smooth, flat
not the proper shape or do bottoms that fit the surface units being
not fit the surface units
used.
being used.
30