Vivotek FE8174V User Manual page 185

priority
delay
trigger
triggerstatus
di
mdwin
mdwin0
vi
0, 1, 2 1
1~999 20
boot, boot
di,
motion,
seq,
recnotify,
tampering,
visignal,
vi
String[40] trigger
<integer> 1
<integer> 0
<integer> 0
<integer> 0
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"visignal" = Video input signal loss.
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi"= Virtual input (Manual trigger)
"volalarm" = Audio detection.
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source window id of
motion detection.
This field is required when trigger
condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
windows, set mdwin as 5.
6/6 Similar to mdwin. The parameter
takes effect when profile 1 of motion
detection is enabled.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
VIVOTEK
st
window.
st rd
and 3
User's Manual - 185