Antenna Connections; Front Panel Controls - Hitachi 60SX3B Operating Manual

ANTENNA CONNECTIONS

connect to inputs and outputs located on the
Video feature
Television's front and rear jack panels.
cable to produce
ANTENNA CONNECTIONS
VHF (75- ) antenna/CATV(cable TV)
When using a 75-ohm coaxial cable system, connect the outdoor antenna or CATV
coaxial cable to the VHF/UHF 75-ohm terminal.
VHF (300- ) antenna/UHF antenna
When using a 300-ohm twin lead from an outdoor antenna, disconnect the VHF or UHF
indoor antenna leads from screws of the VHF or UHF adaptor, and connect outdoor
VHF or UHF antenna leads to these screws of the VHF or UHF adaptor.
When both VHF and UHF antennas are connected
Attach an optional ANT. MIXER (antenna cable mixer) to the TV antenna terminal, and
connect the cables to the ANT. MIXER. Consult your dealer or service store for the
ANT. MIXER.

FRONT PANEL CONTROLS

Click to see front panel diagram.
and laser disc players with an S-
in place of the standard video
a high-quality picture.
- 8 -