Table of Contents
Advertisement
Maintenance
Battery Pack Removal & Replacement
At the end of the product's or battery's life the battery should be removed for disposal and recycling.
Only a technically competent person should undertake battery removal and replacement.
Follow these steps for battery removal or replacement:
1. Switch o the sweeper and ensure the Charger is disconnected.
2. Remove the Tubes and Dust Tray.
3. Turn the unit over, being careful not to switch the product on.
4. Press the clip to release the Battery Cover.
5. Carefully lift the battery out.
6. Slide the plastic cover o the black (-) cable connector.
7. Push the latch on the connector and pull the connector o the battery contact.
8. Repeat for the red (+) cable connector.
9. Push the cable connectors onto the new battery contacts, ensuring they are securely tted.
10. Slide the plastic covers back over the connectors.
11. Replace the battery into the compartment and re t the battery cover.
NOTE: If uncertain as to how to replace your battery pack, we suggest you take your unit to a
Vax authorised service agent to have this service performed. To nd the location of your closest
Vax repair agent go to vax.com.au or call AU 1300 361 505 / NZ 0800 800 900
Battery Cover
Clip
Underside of Sweeper
9
(Keep your Vax as good as new)
Cable
Connector
Vax Service line:
Battery Connector
AU: 1300 361 505
NZ: 0800 800 900
Advertisement
Table of Contents
