Hitachi 53SWX01W Operating Manual page 19

CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING AN S-VIDEO VCR OR LASERDISC PLAYER
1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV
set below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after
approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
See tips on
Page 15
Back of
V
VCR S-VIDEO
OUTPUT
VCR or Laserdisc Player
Hitachi Model or
Similar Model
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line
output. (INPUT: 1 in example on page 13) Refer to your VCR operating guide for more information on line input-
output connections.
L R
Rear Panel of Television
ANT A
OPTICAL
INPUT
COAXIAL
INPUT
TO
CONVERTER
REAR SPEAKER
8W ONLY
R L
ANT B
R L
AUDIO SUB
TO HI-FI WOOFER
19
STOP
CONNECT ONLY 8 OHM SPEAKERS
DO NOT SHORT CIRCUIT
THESE TERMINALS
(Such damage is NOT COVERED
by your television warranty)
S-VIDEO S-VIDEO S-VIDEO
VIDEO
VIDEO Y VIDEO Y
(MONO) (MONO)
P P
B B
L L
L
P P
R R
R R
R
AUDIO AUDIO
AUDIO
MONITOR
INPUT 2
INPUT 1
OUT