Hitachi 53SBX10B Operating Manual page 16

CONNECTING A STEREO SOURCE TO INPUT1~INPUT4
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set
below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after
approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
CONNECTING EXTERNAL VIDEO SOURCES
Back of
VCR
V L R
OUTPUT
VCR
Hitachi Model or
Similar Model
ANT A
TO
CONVERTER
S-VIDEO
ANT B
VIDEO
(MONO)
L
R
AUDIO TO HI-FI
AUDIO
R L
INPUT 1
16
S-VIDEO S-VIDEO
VIDEO
VIDEO Y/VIDEO
(MONO) P (MONO)
B
L L
L
P
R
R R
R
AUDIO AUDIO
AUDIO
MONITOR
INPUT 2 INPUT 4
OUT