Selector Lever; Overview; Transmission Position Display; Transmission Positions - Mercedes-Benz G-Class Operator's Manual

Automatic transmission
120

Selector lever

Overview of transmission positions
Selector lever
Park position with selector lever lock
P
Reverse gear
R
Neutral
N
Drive
D

Transmission position display

Transmission position/shift range
:
Transfer case position
;
Current shift range : and current transfer
case position ; are shown in the instrument
cluster display.
! If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Select transmission position D.
Do not restrict the shift range.
The current position of the selector lever is
shown by the indicators next to the selector
lever.
The indicators light up when the SmartKey is
inserted into the ignition lock. The indicators
go out when the SmartKey is removed from
the ignition lock.
When the selector lever is in position D, you
can influence the gearshifts made by the
automatic transmission by:
restricting the shift range
R
changing gear yourself
R

Transmission positions

Park position
B
Do not shift the transmission into
position P( Y
vehicle is stationary. The parking
lock should not be used as a brake
when parking. In addition to
engaging the parking lock, you
must always apply the parking
brake to secure the vehicle.
i The SmartKey can only be
removed if the transmission is in
position P. When there is no
SmartKey in the ignition lock, the
selector lever is locked in
position P.
If the vehicle electronics are
malfunctioning, the selector lever
may be locked in position P. To
release a locked selector lever, see
"Manual override of parking lock"
( Y page 124).
Have the vehicle electronics
checked immediately at a qualified
specialist workshop.
Reverse gear
C
Only shift the transmission to R
when the vehicle is stationary.
page 127) unless the