Mercedes-Benz SLK Operator's Manual page 98

Seats
96
! To avoid damage to the seats and the seat
heating, observe the following information:
keep liquids from spilling on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
i
The head restraints are installed with the
NECK-PRO system (
reason, it is not possible to remove the
head restraints from the seats.
For more information, contact a qualified
specialist workshop.
Adjusting the seats manually
page 50). For this
Y
To set seat fore-and-aft adjustment: lift
X
lever : and slide the seat forwards or
backwards.
Release lever : again.
X
Make sure that you hear the seat engage in
position.
To adjust the backrest angle: relieve the
X
pressure on the backrest.
Pull handle ; and adjust the backrest to
X
the desired angle.
Release handle ; again.
X
The backrest must audibly engage.
To adjust the seat height: pull handle
X
= upwards or push it down repeatedly
until the seat has reached the desired
height.
Adjusting the seats electrically
Backrest angle
:
Seat fore-and-aft adjustment
;
Seat cushion angle
=
Seat height
?
i
You can store the seat settings using the
memory function (
Y
page 103).