Hitachi 51F520 Operating Manual page 42

Aspect
Use this function to select the Picture Format Aspect Ratio.
Video
Audio
Aspect
Chan. Manager
Locks
Timers
2 times
Setup
Mode
This function manually selects the ASPECT Mode from six (6) choices.
Use the CURSOR buttons ,
Press the CURSOR button to select.
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Use the CURSOR button to highlight the Auto Aspect box.
Use the SELECT button to select. A "✓" in the box indicates that the feature is ON.
1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
NOTES:
2. The Auto Aspect function is best used on composite video, S-Video, and 480i component signals.
3. See page 21 for Aspect Mode availability.
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9 ZOOM. Vertical position can be
changed with these modes. For example, it will be useful for centering the picture area at both the top and bottom of the picture with
480i/480P signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Press the CURSOR buttons
Press the CURSOR buttons
Press EXIT to quit the MENU or select Aspect to return to the main menu.
Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
NOTE:
Move Sel
SEL
, and to select menu item.
or to select menu item.
or to adjust the function.
Aspect
Mode
16:9 Standard
4:3 Standard
4:3 Zoom1
Auto Aspect
Vertical Position
or
Move
42
ASPECT
16:9 Zoom
4:3 Expanded
4:3 Zoom2
0
Return
SEL