Hitachi 51F520 Operating Manual page 39

VIDEO
Color Decoding
Video
Color Management
Color Decoding
Auto Color
Noise Reduction
Auto Movie Mode
Move Select
SEL
Use the CURSOR button or
Press down to select from 4 menu items.
Press the CURSOR buttons
Use the CURSOR button or
Press EXIT to quit menu or select COLOR DECODING to return to previous menu.
Color Decoding settings are independently stored in each of the 4 Color Temperature settings.
NOTE:
The AUTO COLOR function automatically monitors and adjusts the color to maintain natural flesh tones
Auto Color
while preserving fidelity of background colors.
When using Component, HDMI or DVI input, Auto Color will not be available (grayed out).
NOTE:
The NOISE REDUCTION function automatically reduces conspicuous noise in the picture without
Noise Reduction
degrading picture quality. Set NOISE REDUCTION to OFF if the TV experiences picture blocking.
When Noise Reduction is ON, Sharpness function is disabled (grayed out).
The Auto Movie Mode function turns ON or OFF the 3:2 PULLDOWN DETECTION SPECIAL FEATURE.
Auto Movie Mode
Theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields
like video. When film is transferred to video for television viewing, the disparity between the two frame rates
must be reconciled. This involves a process known as 3:2 pulldown.
When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi Projection Television will activate
the circuitry for this special feature to improve video performance when watching film based sources.
1. When using Progressive Scan Component, HDMI or DVI input (Ex. 480p, 720p, 1080i), Auto Movie Mode will not be
NOTES:
available (grayed out).
2. All Video settings are independent of each other based on it's input (ANT A/B, Input 1~5).
Use this function to adjust and balance the percentage of Red, Green and Blue according to the user's
preference in each of the four color temperature settings. Use TINT to adjust flesh tones so they appear
natural.
Off
Off
Off
to highlight function.
, , and to highlight and adjust Red, Green, Color and Tint.
to highlight and select "Reset" to return all settings to default.
Video
Color Decoding
RGB R
or
Red
Green
Color
Tint
Reset
Move
SEL
39
G B
50%
50%
50%
Return