Cisco Linksys WAG200G User Manual page 10

Chapter4
Internet Connection Type > RFC 2516 PPPoE
PPPoE Settings
Username and Password
Password provided by your ISP.
Connect on Demand: Max Idle Tme
the Gateway to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time).
If your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Gateway to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select Connect on Demand. In the Max Idle Time field,
enter the number of minutes you want to have elapsed
before your Internet connection terminates. The default
Max Idle Time is  minutes.
Keep Alve: Redal Perod
the Gateway will periodically check your Internet
connection. If you are disconnected, then the Gateway
will automatically re-establish your connection. To
use this option, select Keep Alve. In the Redial Period
field, specify how often you want the Gateway to check
the Internet connection. The default Redial Period is
30 seconds.
RFC 1483 Routed
If you are required to use RFC 1483 Routed, then select
RFC 183 Routed.
Wreless-G ADSL Home Gateway
Enter the User Name and
You can configure
If you select this option,
Advanced Configuration
Internet Connection Type > RFC 1483 Routed
IP Settings
Your ISP provides these settings.
Internet IP Address Enter the Gateway's IP address, as
seen from the Internet.
Subnet Mask Enter the Gateway's Subnet Mask, as seen
from the Internet (including your ISP).
Default Gateway
Enter the IP address of the ISP server.
Prmary (Requred) and
DNS Enter the DNS (Domain Name System) server IP
address(es) provided by your ISP. At least one is required.
RFC 1483 Bridged
If you are required to use RFC 1483 Bridged, then select
RFC 183 Brdged.
Internet Connection Type > RFC 1483 Bridged
Secondary (Optonal)
9