Cisco LINKSYS PLK200 User Manual page 13

Chapter2
Connect
6 . Plug the Adapter into an electrical outlet and then
click Next .
IMPORTANT: Because the Adapter sends data
over the powerlines of your residence, Linksys
recommends that you plug the Adapter directly
into an electrical outlet . The Adapter has its own
power filter for protection against surges .
7 . The Install Configuration Utility screen will appear and
copy the necessary files to your computer . After the
files have been copied, the Congratulations screen
will appear .
PowerLne AV Ethernet Adapter
Congratulations Screen
Click Onlne Regstraton to register the Adapter at
www.lnksys.com/regstraton
(Internet connection required)
Click Ext to close the Setup Wizard .
Installation